Standard Hanger Type Shot Blasting Machine :
Machine is mostly used for the components having the complicated geometry or the components which cannot be tumbled for quality reasons. Job handling arrangement consists of one/two Rotational Hanger Hooks holding the fixtures for components, mounted on the door of the machine.
For loading the components, door of the machine is opened manually & components to be blasted are hanged one by one on to the door hanger and the door of the machine is closed. Blast wheel units are strategically placed on the Blast cabinet will fire abrasive at high velocity on the components hanged on the hangers. Bi-directional rotational mechanism of hanger ensures that each and every portion of the component will get exposed to the blast stream for through cleaning. After the required blasting cycle, blast wheel unit shuts off and door of the machine is opened manually for unloading of the components.
Standard Models Available -
BT-SH-1 |
Having component Turning Circle of Dia.-600 MM X Ht-700 MM with Weight Carrying capacity of 300 Kg’s |
BT-SH-3 |
Having component Turning Circle of Dia.-600 MM X Ht-1000 MM with Weight Carrying capacity of 300 Kg’s |
BT-SH-5 |
Having component Turning Circle of Dia.-750 MM X Ht-750 MM with Weight Carrying capacity of 300 Kg’s |
BT-SH-7 |
Having component Turning Circle of Dia.-750 MM X Ht-1000 MM with Weight Carrying capacity of 300 Kg’s |
BT-SH-8 |
Having component Turning Circle of Dia.-1000 MM X Ht-1200 MM with Weight Carrying capacity of 300 Kg’s |